When discussing equivalents in terms of (most likely referring to a type of metal alloy such as metal or bronze, commonly used in bearings), thrust bearings, and washers, it's important to understand that equivalents are not always direct one-to-one replacements. However, here is a general overview of how you might approach finding equivalents for thrust bearings and washers:

Thrust Bearing Equivalent:

When searching for an equivalent to a thrust bearing, you should consider the key properties of the material, such as its wear resistance, strength, and corrosion resistance. You may find that other bronze alloys or metal alloys with similar properties can be used as substitutes. It's important to consult with a bearing manufacturer or material specialist to ensure the chosen equivalent material will meet your application's requirements.

Washer Equivalent:

Washers are often used to distribute loads or act as spacers in bearing assemblies. While the specific material used for washers may vary depending on the application, common materials include steel, stainless steel, brass, and bronze. To find an equivalent washer for a thrust bearing, you should consider the material properties required for your application, such as strength, corrosion resistance, and compatibility with the bearing material.

Again, consulting with a bearing or washer manufacturer is recommended to ensure you select an equivalent washer that will meet your needs.

Think About the Application:

Remember that equivalents are not always exact replacements. It's important to consider the specific requirements of your application, such as load capacity, speed, temperature, and environmental conditions. These factors will influence the choice of material and design for your thrust bearing and washers.

In summary, finding equivalents for thrust bearings and washers requires a thorough understanding of the application's requirements and the material properties needed to meet those requirements. Consulting with experts in the field can help ensure you select the most suitable equivalents for your application.

Thrust Bearing Equivalent, Metal-Polymer Bearings washer Replacement manufacture parts, WASHER, SELF-LUBRICATING THRUST

thrust bearing & washer, Composite dry sliding bearings are primarily used for sliding bearing arrangements.

What is composite bearing?

Composite dry sliding bearings are primarily used for bearing arrangements where heavy loads have to be supported and where rotational or oscillating movements are relatively slow.

Where to use composite bearing?

Because of their good sliding properties and compact design, these plain bearings are particularly suitable for bearing arrangements where:

Maintenance-free operation is a prerequisite

There is a risk of lubricant starvation

Lubricants cannot be used or are forbidden

Space is limited.

Why choose composite bearing?

Maintenance-free operation
No lubrication required ( composite)
Initial lubrication required (POM composite)
Minimum wall thickness, minimum space requirements
Accommodation of heavy loads
Wide range of temperatures
Good sliding properties
Virtually no stick-slip
High wear resistance
Less sensitive to edge loading (POM composite)
No machining required.

Thrust Bearing Structure And Composition

• Metal-Polymer Composite Self-lubricating Thrust Bearing Material
• Steel Back + Porous Bronze Sinter
• + Lead

Thrust Bearing Microsection

Sliding layer

+ Lead Thrust Bearing

Porous Bronze Sinter

Steel Backing Thrust Bearing

Operating Performance

Structures

1. /Fibre mixture thickness 0.01~0.03mm, provides an excellent initial transfer film, which effectively coats the mating surfaces of the bearing assembly, forming an oxide type solid lubricant film.
2. Sintered bronze powder thickness 0.20-0.35mm, provides Max. thermal conductivity away from the bearing surface, also serves as a reservoir for the -Fibre mixture.
3. Low-carbon steel, gives exceptionally high load carrying capacity, excellent heat dissipation.
4. Copper/Tin plating thickness 0.002mm, provides good corrosion resistance.

Characteristics

• self-lubricating bushings offer very good wear and low friction performance over a wide range of loads, speeds and temperatures in dry running conditions
• Bushing material suitable for lubricated applications
• Anti-friction bearing suitable for linear, oscillating and rotating movements
• Approved to standard FAR 25.853 and FAR 25.855 - Federal Aviation Regulations – making it suitable for interior aircraft applications

Technical Data

Self Lube DU Thrust Bearing

Metric Size Thrust Bearing

anti friction du thrust washer

Thrust Bearing & Washers Equivalent Think Images